A-100 Stepper Motor Controller No Longer Available The A100SMC controller is no longer availabe. The A200SMC controller is identical to the A100SMC in operation, and can handle motors up to 3A per phase. Please click here for information on the A200SMC. We will continue to post the information on this page for our customers who already own an A100SMC controller. Also, for larger quantities we can produce this controller, but it will no longer be available as a stock item. The A-100 Stepper Motor Controller is ideally suited for controlling up to two NEMA 17 unipolar stepper motors through your computer's parallel port. The software for the controller (both the standalone Windows program and the Windows .dll) is included in the low price of $45.00! The A-100 has multiple diodes and optoisolator chips for reliable operation and to provide maximum protection for your PC. We also offer NEMA 17 motors for $10 that are ideal for use with the A-100. To encourage the use of these motors, we offer a $3 discount off the price of each motor purchased with a controller board. See our order form for more info. A-100 Specifications # of Motors Controlled 1 or 2 Computer Interface Parallel Port Max Motor Current 500mA per channel Motor Voltage Range 5-12VDC Motor Connection 6 Position Terminal Blocks Power Jack 5.5mm, Center Positive Board Dimensions 3.5"x1.75" # of Mounting Holes 3 PSUPPLY1 This power supply is 12V, 1000mA to make sure you get all the juice you need for your A-100 and stepper motors. This supply is suitable for stepper motors that need anywhere from 9-12V and up to 500mA. 120V, 60Hz power grids only. Cost: $5.00 PSUPPLY4 This power supply is similar to the PSUPPLY1 (above) but is rated for 6V, 1000mA. This supply is suitable for stepper motors that need anywhere from 3-6V and up to 500mA (up to 1000mA with the A200). 120V, 60Hz power grids only. Cost: $5.00 PCABLE6 These parallel port cables have all 25 pins connected through for complete and accurate stepping.  They are 6' in length, and are recommended for use with both the A-100 and A-200 controllers. Cost: $5.00
Home - Controllers - Motors - Software - Order - FAQs - Contact Us Copyright © 2004, Mill-Shaf Technologies, Inc. All Rights Reserved